Galaxy Tab A7 (LTE) SM-T507 Binary 3

The specific Galaxy Tab A7 (LTE) SM-T507 U3 Firmware Download Package has a Stock ROM of Galaxy Tab A7 (LTE) SM-T507 U3 Security Patch Level. This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy Tab A7 (LTE) SM-T507 Binary 3 Firmware – Android 11 R – TUR – T507JXU3BVB2 – Turkey

There are various reasons to flash “Stock Firmware on Galaxy Tab A7 (LTE) SM-T507 U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy Tab A7 (LTE) SM-T507 U3 Stock ROM Details:

SM-T507 U3 Firmware – TUR – T507JXU3BVB2 – Turkey:

Model SM-T507 Binary 3 U3, S3, Bit 3
Region / Country Turkey
Language Multi-Language
Android version Android 11 R
Operator / Carrier clear
PDA T507JXU3BVB2
CSC T507TUR3BVB2
MODEM CP Version T507JXU3BVB2
product code TUR
Build Date 2022-02-17
Security Patch Level
Size 3.53GB Full Files
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy Tab A7 (LTE) SM-T507 U3 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the  Galaxy Tab A7 (LTE) SM-T507 U3 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.

8: Once Odin detects your Device, click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your Device may take some time to reboot but don’t be alarmed.

When your Galaxy Tab A7 (LTE) SM-T507 U3 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab A7 (LTE) SM-T507 U3 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using Deviceormation in this guide.
  • Phone must have a 70–80% charge.