Galaxy Tab A7 Lite SM-T225C U1 Firmware [Full Repair]

Galaxy Tab A7 Lite SM-T225C Binary 1 Firmware

The specific Galaxy Tab A7 Lite SM-T225C U1 Firmware Download Package comes with a Stock ROM of Galaxy Tab A7 Lite SM-T225C U1. This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy Tab A7 Lite SM-T225C Binary 1 Firmware – T225CZCU1AUH5 – CHC – Android 11 R

There are various reasons to flash “Stock Firmware on Galaxy Tab A7 Lite SM-T225C U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy Tab A7 Lite SM-T225C U1 Stock ROM Details:

Model SM-T225C U1, Bit 1, Binary 1
PDA T225NKOU1AUH5
CSC T225NKOO1AUH5
Operator / Carrier Clean ZTO (no logo, carrier apps)
Product code KOO
Android version Android 11 R
Size 4 GB
[quads id=2]
Download Google Drive  OneDrive

How To Install Galaxy Tab A7 Lite SM-T225C U1 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy Tab A7 Lite SM-T225C U1 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed, you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy Tab A7 Lite SM-T225C U1 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab A7 Lite SM-T225C U1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of information in this guide.
  • Phone must have a 70–80% charge.