The specific Galaxy Tab A 8.0 LTE SM-T295 U4 Firmware Download Package comes with a Stock ROM of Galaxy Tab A 8.0 LTE SM-T295 U4 Security Patch Level 2022-08-01 (August 1, 2022). This helps you to bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy Tab A 2019 8.0 LTE SM-T295 Binary 4 Android 11 R Brazil ZTO T295XXU4CVH1
There are various reasons to flash “Stock Firmware on Galaxy Tab A 8.0 LTE SM-T295 U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy Tab A 8.0 LTE SM-T295 U4
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Tab A 8.0 LTE SM-T295 U4 Stock ROM Details:
SM-T295 U4 Brazil ZTO T295XXU4CVH1:
Model | SM-T295 Binary 4 U4, S4, Bit 4 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | T295XXU4CVH1 |
CSC | T295OWO4CVH1 |
CP Version / Baseband Modem | T295XXU4CVH1 |
product code | ZTO |
Build Date | 2022-08-07 |
Security Patch Level | 2022-08-01 (August 1, 2022) |
Size | 3.5 GB |
Download | Mega | Google Drive |
How To Install Galaxy Tab A 8.0 LTE SM-T295 U4 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy Tab A 8.0 LTE SM-T295 U4 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Tab A 8.0 LTE SM-T295 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Tab A 8.0 LTE SM-T295 U4 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.