The specific Galaxy Tab A 10.1 SM-T510 U5 Firmware Download Package comes with a Stock ROM of Galaxy Tab A 10.1 SM-T510 U5 Security Patch Level 2022-12-01 (December 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy Tab A 10.1 SM-T510 Binary 5 Android 11 R Brazil ZTO T510XXS5CVL1
There are various reasons to flash “Stock Firmware on Galaxy Tab A 10.1 SM-T510 U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy Tab A 10.1 SM-T510 U5
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy Tab A 10.1 SM-T510 U5 Stock ROM Details:
SM-T510 U5 Brazil ZTO T510XXS5CVL1:
Model | SM-T510 Binary 5 U5, S5, Bit 5 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | T510XXS5CVL1 |
CSC | T510OWO5CVG2 |
Modem CP Version / Baseband | T510XXS5CVL1 |
product code | ZTO |
Build Date | 2022-12-12 |
Security Patch Level / Security | 2022-12-01 (December 1, 2022) |
Size | 3.1GB |
Download | Mega | Google Drive |
How To Install Galaxy Tab A 10.1 SM-T510 U5 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy Tab A 10.1 SM-T510 U5 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy Tab A 10.1 SM-T510 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Tab A 10.1 SM-T510 U5 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.