Galaxy Tab A 10.1 SM-T510 U3 Firmware -Android 10 Q

Tab A 10.1 SM-T510 Binary 3 Firmware

The specific Galaxy Tab A 10.1 SM-T510 Binary 3 Firmware Download Package comes with a Stock ROM of Galaxy Tab A 10.1 SM-T510 U3 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass the FRP lock and revert from the root and custom ROM.

Galaxy Tab A 10.1 SM-T510 U3 Android Q T510XXU3BTFN

There are various reasons to flash “Stock Firmware on Galaxy Tab A 10.1 SM-T510 U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy Tab A 10.1 SM-T510 U3 Stock ROM Details:

Galaxy Tab A 10.1 SM-T510 U3 Android Q T510XXU3BTFN:

Model SM-T510 Binary 3 U3, S3, Bit 3
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator Clean ZTO (without logo, operator apps)
PDA T510XXU3BTFN
CSC T510OWO3BTG2
Product code ZTO
Build Date 30 Jun 2020
Security Patch Level 2020-07-01 (1 July 2020)
Size 2.3 GB
[quads id=2]
Downloads 4File Google Drive Android File Host

How To Install Galaxy Tab A 10.1 SM-T510 U3 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy Tab A 10.1 SM-T510 U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy Tab A 10.1 SM-T510 U3 finally boots up, you should now run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab A 10.1 SM-T510 U3 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.