Home Stock Firmware Samsung Galaxy SSP SM-A716V U5 Firmware – Android 11

Galaxy SSP SM-A716V U5 Firmware – Android 11

SM-A716V Binary 5 Firmware

The specific Galaxy SSP SM-A716V U5 Firmware Download Package comes with a Stock ROM of Galaxy SSP SM-A716V U5. This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy SSP SM-A716V Binary 5 Firmware – Android 11 R – A716VSQU5DUJ2 – VZW – United States

There are various reasons to flash “Stock Firmware on Galaxy SSP SM-A716V U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy SSP SM-A716V U5 Stock ROM Details:

SM-A716V U 5 A716VSQU5DUJ2 – VZW – United States:

Model SM-A716V Binary 5 U5, S5, Bit 5
Region / Country United States
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean (no logo, carrier apps)
AP / PDA A716VSQU5DUJ2
CSC P615CCHC3EVE6
CP Version / Baseband Modem A716VOYN5DUJ2
product code VZW
Build Date 20211022124715
Security Patch Level
Size 5.34 GB Full Files
[quads id=2]
Download Google Drive Mega

How To Install Galaxy SSP SM-A716V U5 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the  Galaxy SSP SM-A716V U5 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed, you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy SSP SM-A716V U5 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy SSP SM-A716V U5 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.

NO COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Exit mobile version