Home Stock Firmware Samsung Galaxy S9 SM-G960W U9 Firmware – Android 10 Q

Galaxy S9 SM-G960W U9 Firmware – Android 10 Q

SM-G960W Binary 9 Firmware

The specific Galaxy S9 SM-G960W U9 Firmware Download Package has a Stock ROM of Galaxy S9 SM-G960W U9 Security Patch Level 2022-02-01 (February 2022). This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy S9 SM-G960W Binary 9 Firmware – Android 10 Q – BMC – G960WVLS9FVA1 – Canada

There are various reasons to flash “Stock Firmware on Galaxy S9 SM-G960W U9“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

Suppose you’re going to reset your Phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the Phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S9 SM-G960W U9 Stock ROM Details:

SM-G960W U9 Firmware – BMC – G960WVLS9FVA1 – Canada:

Model SM-G960WF Binary 9 U9, S9, Bit 9
Region / Country Canada
Language Multi-Language
Android version Android 10 Q
Operator / Carrier Clean (no logo, carrier apps)
PDA G960WVLS9FVA1
CSC G960WOYV9FVA1
MODEM CP Version
product code BMC
Build Date 20220209024801
Security Patch Level 2022-02-01 (February 1, 2022)
Size 4.39 GB Full Files
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy S9 SM-G960W U9 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy S9 SM-G960W U9 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the Phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: Mmustu will see a Warning Yellow Triangle Sign in the Download. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.

8: Once Odin detects your Device, click on the PDA button, and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10lashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. Your Device may take some time to reboot but don’t be alarmed.

When your Galaxy S9 SM-G960W U9 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S9 SM-G960W U9 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.
  • Phone must have a 70–80% charge.

Exit mobile version