The specific Galaxy S9 SM-G9608 U9 Firmware Download Package comes with a Stock ROM of Galaxy S9 SM-G9608 U9 ADD DATE 2022-02-08 Feb 2022. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S9 SM-G9608 Binary 9 Firmware – CHM – China – G9608ZMS9FVA4 – Android 10 Q
There are various reasons to flash “Stock Firmware on Galaxy S9 SM-G9608 U9“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S9 SM-G9608 U9
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S9 SM-G9608 U9 Stock ROM Details:
SM-G9608 U9 Firmware – CHM – China – G9608ZMS9FVA4:
| Model | SM-G9608 Binary 9 U9, S9, Bit 9 |
| Region / Country | China |
| Language | Multi-Language |
| Android version | Android 10 Q |
| Operator / Carrier | Clean (no logo, carrier apps) |
| PDA | G9608ZMS9FVA4 |
| CSC | G9608CHM9FVA4 |
| MODEM CP Version | – |
| product code | CHM |
| Build Date | 20220121201721 |
| ADD DATE | 2022-02-08 |
| Size | 4.14 GB Full Files |
| Download | Google Drive | Android File Host |
How To Install Galaxy S9 SM-G9608 U9 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy S9 SM-G9608 U9 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy S9 SM-G9608 U9 finally boots up.
If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S9 SM-G9608 U9 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.