The specific Galaxy S9 SM-G9600 U9 Firmware Download Package comes with a Stock ROM of Galaxy S9 SM-G9600 U9 Security Patch Level 2022-05-01 (May 1, 2022). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy S9 SM-G9600 Binary 9 Android 10 Q Brazil ZTO G9600ZHU9FVF2
There are various reasons to flash “Stock Firmware on Galaxy S9 SM-G9600 U9“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S9 SM-G9600 U9
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy S9 SM-G9600 U9 Stock ROM Details:
SM-G9600 U9 Brazil ZTO G9600ZHU9FVF2:
Model | SM-G9600 Binary 9 U9, S9, Bit 9 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 10 Q |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | G9600ZHU9FVF2 |
CSC | G9600OWO9FVF2 |
CP Version / Baseband Modem | G9600ZCU9FVE3 |
product code | ZTO |
Build Date | 2022-06-30 |
Security Patch Level | 2022-05-01 (May 1, 2022) |
Size | 4.2 GB |
Brazil – ZTO | Mega | Google Drive |
Panama TPA | Mega |
Google Drive |
SM-G9600 Downgrade Firmware Binaries:
- Samsung Galaxy S9 SM-G9600 U6 Firmware
- Galaxy S9 SM-G9600 U7 Firmware – G9600ZHS7ETH1
- Galaxy S9 SM-G9600 U8 Firmware – G9600ZHS8FUB4
How To Install Galaxy S9 SM-G9600 U9 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is installed on your computer, Skip this Step.
2: Download and extract the Galaxy S9 SM-G9600 U9 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S9 SM-G9600 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S9 SM-G9600 U9 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.