Galaxy S9 + SM-G965U U8 Firmware – G965USQU8FTJ3

Galaxy S9 + SM-G965U Binary 8 Firmware

The specific Galaxy S9 + SM-G965U U8 Firmware Download Package comes with a Stock ROM of Galaxy S9 + SM-G965U U8 Security Patch Level 2020-10-01 (1 October 2020). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S9 + SM-G965U U8 Firmware

There are various reasons to flash “Stock Firmware on Galaxy S9 + SM-G965U U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S9 + SM-G965U U8 Stock ROM Details:

Model SM-G965U Binary 8 U8, S8, Bit 8
Region / Country United States
Language Multi-Language
Android version Android 10 Q
Operator Clean USC (without logo, operator apps)
PDA G965USQU8FTJ3
CSC G965UOYN8FTJ3
Product code USC
Build Date Thu, 08 Oct 2020
Security Patch Level 2020-10-01 (1 October 2020)
Size 4.6 GB
[quads id=2]
Download Google Drive Android File Host

Download Galaxy S9 + SM-G965U U8 Boot.img

boot.img Galaxy S9 + SM-G965U G965USQU8FTJ3 to root on Magisk without TWRP

Download Google Drive

How To Install Galaxy S9 + SM-G965U U8 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy S9 + SM-G965U U8 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy S9 + SM-G965U finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S9 + SM-G965U U8 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from using information in this guide.
  • Phone must have a 70–80% charge.