S8 SM-G9500 Binary 3 Firmware

The specific Galaxy S8 SM-G9500 U3 Firmware Download Package has a Stock ROM of Galaxy S8 SM-G9500 U3. This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy S8 SM-G9500 U3 Firmware

There are various reasons to flash “Stock Firmware on Galaxy S8 SM-G9500 U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy S8 SM-G9500 U3 Stock ROM Details:

AP VERSION CSC VERSION code Type OS Size Link
G9500ZCU3CRH3 G9500CHC3CRH3 CHC FULL 8.0 2.6G DOWNLOAD
G9500ZHU3CRJ1 G9500ZZH3CRJ1 TGY FULL 8.0 2,8G DOWNLOAD
G9500ZCS3DSD5 G9500CHC3DSD5 CHC FULL OS9 2,9G DOWNLOAD
G9500ZCU3DSF2 G9500CHC3DSF2 CHC FULL OS9 2,9G DOWNLOAD
G9500ZHS3DSF5 G9500ZZH3DSF5 TGY FULL OS9 3,0G DOWNLOAD
[quads id=2]

How To Install Galaxy S8 SM-G9500 U3 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the Galaxy S8 SM-G9500 U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

You should run your desired firmware when your Galaxy S8 SM-G9500 U3 finally boots up.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S8 SM-G9500 U3 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.