Galaxy S8 Plus SM-G9550 U5 Firmware – Full Repair

S8 Plus SM-G9550 Binary 5 Firmware

The specific Galaxy S8 Plus SM-G9550 U5 Firmware Download Package has a Stock ROM of Galaxy S8 Plus SM-G9550 U5. This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S8 Plus SM-G9550 Binary 5 Firmware – Full Repair

There are various reasons to flash “Stock Firmware on Galaxy S8 Plus SM-G9550 U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy S8 Plus SM-G9550 U5 Stock ROM Details:

AP VERSION CSC VERSION code Type OS Size Link
G9550ZHS 5 DTC1 G9550ZZH5DTC1 TGY FULL OS9 3.1G DOWNLOAD
G9550ZCS 5 DTC1 G9550CHC5DTC1 CHC FULL OS9 3.0G DOWNLOAD
G9550ZHU 5 DTA1 G9550ZZH5DTA1 TGY FULL OS9 3.1G DOWNLOAD
G9550ZCU 5 DSK2 G9550CHC5DSK2 CHC FULL OS9 3.0G DOWNLOAD

How To Install Galaxy S8 Plus SM-G9550 U5 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the Galaxy S8 Plus SM-G9550 U5 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

Advertisements

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

Advertisements

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy S8 Plus SM-G9550 finally boots up, you should run your desired firmware.

Advertisements

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S8 Plus SM-G9550 U5 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.

About Asim

Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!
Exit mobile version