G892AUCU5CTF4

The specific Galaxy S8 Active SM-G892A U5 Firmware Download Package has a Stock ROM of Galaxy S8 Active SM-G892A U5. This helps you to bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy S8 Active SM-G892A ATT Binary 5 Firmware – G892AUCU5CTF4 – United States – Android 9 Pie

There are various reasons to flash “Stock Firmware on Galaxy S8 Active SM-G892A U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S8 Active SM-G892A U5 Stock ROM Details:

SM-G892A ATT U5 Firmware – G892AUCU5CTF4 – United States:

Model SM-G892A Binary 5, U5, S5, Bit 5
Region / Country United States
Language Multi-Language
Android version Android 9 Pie
Operator / Carrier Clean (no logo, carrier apps)
PDA G892AUCU5CTF4
CSC G892AATT5CTF4
MODEM CP Version
product code ATT
Build Date 2020-12-23 12:07:27
Security Patch Level
Size  4.52 GB Full Files
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy S8 Active SM-G892A U5 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the Galaxy S8 Active SM-G892A U5 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

You should run your desired firmware when your Galaxy S8 Active SM-G892A U5 finally boots up.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S8 Active SM-G892A U5 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.