Galaxy S6 Active SM-G890A Firmware Updates

Galaxy S6 Active SM-G890A Firmware

When it comes to a guide like how to Update Galaxy S6 Active SM-G890A firmware, your information with flashing tools is important.

However,  Updating the Galaxy S6 Active SM-G890A Stock ROM  can be difficult at times when you search for the internet to unbrick Galaxy S6 Active SM-G890A. On this page, you will find information to help you prepare for flashing the Galaxy S6 Active SM-G890A.

Why would you want to Update Firmware on your Galaxy S6 Active SM-G890A?

There are various reasons to flash “Stock Firmware on Galaxy S6 Active SM-G890A. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.
[quads id=2]

Pre-requirements to Install Galaxy S6 Active SM-G890A Update:

Most smartphones back up automatically in the background in case of incidents. To ensure a complete transition to your new device, a full backup is necessary.

How To Install Galaxy S6 Active SM-G890A Firmware Update

1: Download and Install Samsung USB Driver on your computer.

2: Download and extract the Galaxy S6 Active SM-G890A Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold the Volume Down, Home, and Power buttons at the same time for 5-8 seconds until the download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy S6 Active SM-G890A finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. The firmware number can be found under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S6 Active SM-G890A Firmware.
  • Use these instructions at your own risk.
  • Phone must have a 70–80% charge.

Galaxy S6 Active SM-G890A Stock ROM Details:

File Name: G890AUCU5CPK3_6.0.1_4File_USA_ATT.zip
Country: USA
File Size: 2 GB
Android Version: 6.0.1
[quads id=2]
Get Link

Other Methode To Update Galaxy S6 Active:

Software Update Via Settings Menu

You don’t need any software or tools to update the software on a Galaxy S6 Active using this method. Using this approach, the latest version of Android will be downloaded and installed.

Prerequisites for Software Update:

  • Your battery must be greater than 50% charged.
  • An Internet connection with good speed (Because You may need to download big files)

Follow these steps to Update Samsung software.

From your home screen, access settings.

then from the settings menu, choose Software update (If you will not see the software update option, Select about phone and check).

You will see the most recent software to upgrade (if available) after some waiting. then select Download from the menu.

  • You may also access the software download page straight from the notification bar; simply pull it down and select “Software Update” to launch the upgrading process.
  • Await the software’s download.
  • Click the Install button after the update download is complete.
  • The reboot of your phone will take some time.
  • Your Samsung phone’s software update has now been successful.
  • The process of updating software can also be scheduled. When you want to install this update, you can set a timer.

And also check the last update date and information by tapping Last update information option.

Note: By activating the Download Updates automatically option, you can also download updates automatically.

Also, check out this guide for any Samsung Phone Software Update if your mobile has different options.

Software Update with Samsung Smart Switch

Software called Samsung Smart Switch was created by the Samsung corporation. It is used to back up and restores Samsung mobile data as well as transfer files (such as photos, contacts, and apps) from a phone to a computer.

You’ll need the following to utilize this program on Windows:

  • A Samsung Android phone with Android version 4.3 or later
  • Laptop or PC with Windows XP or Windows 7, Windows 8.1, or Windows 10.
  • RAM: 1GB or higher
  • CPU must be Pentium 4; 2.4 GHz or higher.
  • Screen Resolution must be 1024 x 768 (600), 32-bit or higher.
  • Windows Media Player version 11 or later.

You need the following to use this program on a Mac:

  • a Samsung Android smartphone running Android 4.3 or above or an
  • Apple iPhone running iOS 4.2.1 or newer. With Mac OS X® 10.6 or later on a Mac PC.
    RAM must be 1GB or more and the CPU must be an Intel Core 2 Duo running at 2.0 GHz.
  • Installed on your computer or laptop is an Android file transfer program with a screen resolution of 1280 x 800.

Connect Mobile to Computer

  • Attach a mobile device to a computer
  • Install Samsung Smart Switch on your PC or laptop after downloading it.
  • Next, use USB to connect your Android phone to your computer.
  • Give your computer permission to install any latest drivers on your phone. This procedure requires some time.
  • Open Samsung Smart Switch on your computer.
  • Then, on your phone, select the allow option.

Then, if you didn’t install the Smart Switch app, select the Download smart switch button.

Now, the Smart Switch app is downloading.

Then, Click on the Open Smart Switch option on the phone.

Now, You have successfully connected Samsung smart switch app to the PC.

software updates for phones

A smart switch makes it simple to upgrade the mobile software on the Samsung Galaxy S6 Active. The update button is shown on the home screen. whether a new version of the software is accessible.

On the Update button, click.

The most recent software information is available here. then press the forward arrow.

Read each and every point carefully. then select the All Confirmed button. After the download has finished. Your phone will restart. Your mobile device’s software update process is now complete.

One comment

Comments are closed.