Galaxy S22 Ultra SM-S908U U1 Firmware – Android 12 S

SM-S908U Binary 1 Firmware

The specific Galaxy S22 Ultra SM-S908U U1 Firmware Download Package has a Stock ROM of Galaxy S22 Ultra SM-S908U U1 ADD DATE 2022-03-23. This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S22 Ultra SM-S908U Binary 1 Firmware – Android 12 S – PCT – S908U1UEU1AVC8 – Puerto Rico

There are various reasons to flash “Stock Firmware on Galaxy S22 Ultra SM-S908U U1“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

Suppose you will reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.


The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the Phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware


Galaxy S22 Ultra SM-S908U U1 Stock ROM Details:

SM-S908U U1 Firmware – PCT – S908U1UEU1AVC8 – Puerto Rico:

Model SM-S908U Binary 1 U1, S1, Bit 1
Region / Country Puerto Rico
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean (no logo, operator apps)
MODEM CP Version
product code PCT
Build Date 20220313074640
ADD DATE 2022-03-23
Size  7.32 GB  Full Files
Download Google Drive Android File Host

How To Install Galaxy S22 Ultra SM-S908U U1 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the  Galaxy S22 Ultra SM-S908U U1 Firmware  files on your computer.

3: Now, Switch off your Smartphone.


4: After switching off the Phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.


7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.


Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy S22 Ultra SM-S908U U1 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”


  • Read and understand the Full Guide before flashing.”Galaxy S22 Ultra SM-S908U U1 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.

About Asim

Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!
Exit mobile version