Galaxy S22 Ultra SM-S908E/DS U4 Firmware – Android 13 T

Galaxy S22 Ultra SM-S908E/DS Binary 4 Firmware
If you own a Galaxy S22 Ultra SM-S908E/DS U4 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy S22 Ultra SM-S908E/DS U4 With 2023-04-01 (April 1, 2023)
Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy S22 Ultra SM-S908E/DS Binary 4 Android 13 Brazil ZTO S908EXXU4CWD2

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy S22 Ultra SM-S908E/DS U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Preparation:

How To Install Galaxy S22 Ultra SM-S908E/DS U4 Stock Firmware:

Download Galaxy S22 Ultra SM-S908E/DS U4 Latest Firmware:

SM-S908E/DS U4 Brazil ZTO S908EXXU4CWD2:

Model SM-S908E/DS Binary 4 U4, S4, Bit 4
Region / Country Brazil
Language Multi-Language
Android version Android 13 T
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA S908EXXU4CWD2
CSC S908EOWO4CWD2
Modem CP Version / Baseband S908EXXU4CWD2
product code ZTO
Model References SM-S908EZGKZTO, SM-S908EDRUZTO, SM-S908EDRKZTO
Build Date 2023-04-10
Security Patch Level 2023-04-01 (April 1, 2023)
Size 8.4 GB
[quads id=2]
Download Google Drive

SM-S908E/DS U4 Brazil ZTO S908EXXS4CWD1:

Model SM-S908E/DS Binary 4 U4, S4, Bit 4
Region / Country Brazil
Language Multi-Language
Android version Android 13 T
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA S908EXXS4CWD1
CSC S908EOWO4CWD1
Modem CP Version / Baseband S908EXXS4CWD1
product code ZTO
Model References SM-S908EZGKZTO, SM-S908EDRUZTO, SM-S908EDRKZTO
Build Date 2023-04-06
Security Patch Level 2023-04-01 (April 1, 2023)
Size 8.3 GB
Download Google Drive

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy S22 Ultra SM-S908E/DS U4 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy S22 Ultra SM-S908E/DS U4 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue to encounter problems, you may need to perform a factory reset on your device.

Conclusion

Installing the latest firmware on your Galaxy S22 Ultra SM-S908E/DS U4 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.