Home Stock Firmware Galaxy S22+ SM-S906E U2 Firmware – Android 12 S

Galaxy S22+ SM-S906E U2 Firmware – Android 12 S

SM-S906E Binary 2 Firmware

The specific Galaxy S22+ SM-S906E U2 Firmware Download Package comes with a Stock ROM of Galaxy S22+ SM-S906E U2 Security Patch Level 2022-08-01 (August 1, 2022). This helps you to bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy Galaxy S22+ SM-S906E Binary 2 Android 12 Brazil ZTO S906EXXU2AVH9

There are various reasons to flash “Stock Firmware on Galaxy S22+ SM-S906E U2“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update Downgrade disable FRP lock
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements:

Galaxy S22+ SM-S906E U2 Stock ROM Details:

SM-S906E U2 Brazil ZTO S906EXXU2AVH9:

Model SM-S906E Binary 2 U2, S2, Bit 2
Region / Country Brazil
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA S906EXXU2AVH9
CSC S906EOWO2AVH9
CP Version / Baseband Modem S906EXXU2AVH9
product code ZTO
Build Date 2022-08-10
Security Patch Level 2022-08-01 (August 1, 2022)
Size 8 GB
Advertisements
Download Google Drive boot.img
SM-S906E U2 CGU - Guatemala S906EXXU2AVG6:
Model SM-S906E Binary 2 U2, S2, Bit 2
Region / Country Guatemala
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean – no logo, carrier apps
AP / PDA S906EXXU2AVG6
CSC S906EOWO2AVG6
CP Version / Baseband Modem
product code CGU
Build Date / Upload 20220725142610
Security Patch Level
Size 7.98 GB Full Files
Guatemala – CGU Mediafire
Brazil –
SM-S906E U2 Brazil ZTO S906EXXU2AVF9:
Model SM-S906E Binary 2 U2, S2, Bit 2
Region / Country Brazil
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean ZTO – no logo, carrier apps
AP / PDA S906EXXU2AVF9
CSC S906EOWO2AVF9
CP Version / Baseband Modem S906EXXU2AVF9
product code ZTO
Build Date / Upload 2022-06-20 / 11 Jul 22
Security Patch Level 2022-06-01 – July 1, 2022
Size 8 GB
DOWNLOADS Mediafire
SM-S906E U2 Brazil ZTO S906EXXS2AVE6:
Model SM-S906E Binary 2 U2, S2, Bit 2
Region / Country Brazil
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA S906EXXS2AVE6
CSC S906EOWO2AVE6
CP Version / Baseband Modem S906EXXS2AVE6
product code ZTO
Build Date 2022-05-18
Security Patch Level 2022-05-01 (May 1, 2022)
Size 7.9 GB
Download Google Drive Mega

How To Install Galaxy S22+ SM-S906E U2 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the  Galaxy S22+ SM-S906E U2 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

Advertisements

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed, you will be able to see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy S22+ SM-S906E U2 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

Advertisements
  • Please read and understand the Full Guide before flashing “Galaxy S22+ SM-S906E U2 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Previous articleGalaxy J4 SM-J400M U14 Firmware – Android 10 Q
Next articleGalaxy S22 Ultra SM-S908E U2 Firmware – Android 12 S
Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!