If you own a Galaxy S22+ SM-S906E/DS U4 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy S22+ SM-S906E/DS U4 With 2023-05-01 (May 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy S22+ SM-S906E/DS Binary 4 Android 13 Brazil ZTO S906EXXS4CWD5
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy S22+ SM-S906E/DS U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Preparation:
- Supported Phone: Galaxy S22+ SM-S906E/DS U4
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy S22+ SM-S906E/DS U4 Stock Firmware:
Download Galaxy S22+ SM-S906E/DS U4 Latest Firmware:
SM-S906E/DS U4 Brazil ZTO S906EXXS4CWD5:
Model | SM-S906E/DS Binary 4 U4, S4, Bit 4 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 13 T |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | S906EXXS4CWD5 |
CSC | S906EOWO4CWD2 |
Modem CP Version / Baseband | S906EXXU4CWD2 |
product code | ZTO |
Model References | SM-S906EZGJZTO, SM-S906EIDKZTO, SM-S906EIDJZTO |
Build Date | 2023-04-25 |
Security Patch Level | 2023-05-01 (May 1, 2023) |
Size | 8.2 GB |
Download | Google Drive |
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy S22+ SM-S906E/DS U4 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy S22+ SM-S906E/DS U4 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S22+ SM-S906E/DS U4 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue encountering problems, you may need to perform a factory reset on your device. This will erase all of your data, so be sure to back up your data before performing a factory reset.
Conclusion
Installing the latest firmware on your Galaxy S22+ SM-S906E/DS U4 can bring several improvements to your device, including bug fixes and new features. If you follow the steps outlined in this guide, you should be able to update your device to the latest firmware version successfully. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.