The specific Galaxy S21+ 5G SM-G996B U5 Firmware Download Package comes with a Stock ROM of Galaxy S21+ 5G SM-G996B U5 Security Patch Level 2022-10-01 (October 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S21+ 5G SM-G996B Binary 5 Android 13 Portugal TPH G996BXXU5DVJC
There are various reasons to flash “Stock Firmware on Galaxy S21+ 5G SM-G996B U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S21+ 5G SM-G996B U5
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S21+ 5G SM-G996B U5 Stock ROM Details:
SM-G996B U5 Portugal TPH G996BXXU5DVJC:
Model | SM-G996B Binary 5 U5, S5, Bit 5 |
Region / Country | Portugal |
Language | Multi-Language |
Android version | Android 13 T |
Operator / Carrier | Clear TPH (no logo, carrier apps) |
AP / PDA | G996BXXU5DVJC |
CSC | G996BOXM5DVJC |
CP Version / Baseband Modem | G996BXXU5DVJA |
product code | TPH |
Build Date | 2022-10-24 |
Security Patch Level | 2022-10-01 (October 1, 2022) |
Size | 7.1 GB |
Download | Google Drive |
Downgrade Binaries For SM-G996B:
How To Install Galaxy S21+ 5G SM-G996B U5 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy S21+ 5G SM-G996B U5 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the phone, you need to boot into Download Mode. To boot.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you have to press the Volume Up key to continue.
6:mustownload and open Odin. Then, connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Once Odin detects your device, click the button and select the Firmware.tar file.
9: Now, click the Odin button to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the firm is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy S21+ 5G SM-G996B U5 finally boots up, you should have your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S21+ 5G SM-G996B U5 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Befousingg, Stock ROM must have a 70–80% charge.