Galaxy S21+ 5G SM-G996B/DS U7 Firmware – Android 13 T

Galaxy S21+ 5G SM-G996B/DS Binary 7

If you own a Galaxy S21+ 5G SM-G996B/DS smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy S21+ 5G SM-G996B/DS U7 With 2023-04-01 (April 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy S21+ 5G SM-G996B/DS Binary 7 Android 13 Brazil ZTO G996BXXS7EWE3

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy S21+ 5G SM-G996B/DS U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Preparation:

How To Install Galaxy S21+ 5G SM-G996B/DS U7 Stock Firmware:

Download Galaxy S21+ 5G SM-G996B/DS U7 Latest Firmware:

SM-G996B/DS U7 Brazil ZTO G996BXXS7EWE3:

Model SM-G996B/DS Binary 7 U7, S7, Bit 7
Region / Country Brazil
Language Multi-Language
Android version Android 13 T
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA G996BXXS7EWE3
CSC G996BOWO7EWCK
Modem CP Version / Baseband G996BXXS7EWE2
product code ZTO
Model References SM-G996BZKJZTO, SM-G996BZKKZTO, SM-G996BZKRZTO, SM-G996BZVJZTO
Build Date 2023-05-16
Security Patch Level 2023-05-01 (May 1, 2023)
Size 7.3GB
[quads id=2]
Download Google Drive

SM-G996B/DS U7 Brazil ZTO G996BXXS7EWC4:

Model SM-G996B/DS Binary 7 U7, S7, Bit 7
Region / Country Brazil
Language Multi-Language
Android version Android 13 T
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA G996BXXS7EWC4
CSC G996BOWO7EWC4
Modem CP Version / Baseband G996BXXS7EWC4
product code ZTO
Model References SM-G996BZKJZTO, SM-G996BZKKZTO, SM-G996BZKRZTO, SM-G996BZVJZTO
Build Date 2023-04-03
Security Patch Level 2023-04-01 (April 1, 2023)
Size 7.2GB
Download Google Drive

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy S21+ 5G SM-G996B/DS U7 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy S21+ 5G SM-G996B/DS U7 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S21+ 5G SM-G996B/DS U7 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue to encounter problems, you may need to perform a factory reset on your device.

Conclusion

Installing the latest firmware on your Galaxy S21+ 5G SM-G996B/DS U7 can bring several improvements to your device, including bug fixes and new features. If you follow the steps outlined in this guide, you should be able to update your device to the latest firmware version successfully. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.

Asim

Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *