The specific Galaxy S21 FE 5G SM-G990U Firmware Download Package has a Stock ROM of Galaxy S21 FE 5G SM-G990U Build 2021-07-19. This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S21 FE 5G SM-G990U Firmware – G990USQU1AUG7 – Android 11 R – CCT – United States
There are various reasons to flash “Stock Firmware on Galaxy S21 FE 5G SM-G990U“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-prerequisites:
- Supported Phone: Galaxy S21 FE 5G SM-G990U
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S21 FE 5G SM-G990U Stock ROM Details:
SM-G990U Firmware – G990USQU1AUG7 – CCT – United States:
| PDA / AP | G990USQU1AUG7 |
| CSC version | G990UOYN1AUG7 |
| MODEM / CP | G990USQU1AUG7 |
| Region | CCT – United States |
| Creation Date | 2021-07-19 |
| Change list | 22187232 |
| Android | Android 11 R |
| Download | CCT-G990USQU1AUG7-20210811150229.zip |
How To Install Galaxy S21 FE 5G SM-G990U Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy S21 FE 5G SM-G990U Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S21 FE 5G SM-G990U finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S21 FE 5G SM-G990U Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.
