The specific Galaxy S21 FE 5G SM-G990E U3 Firmware Download Package comes with a Stock ROM of Galaxy S21 FE 5G SM-G990E U3 Security Patch Level 2022-11-01 (November 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S21 FE 5G SM-G990E Binary 3 Android 13 T Panama TPA G990EXXU3DVK4
There are various reasons to flash “Stock Firmware on Galaxy S21 FE 5G SM-G990E U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade the rest of FRP
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-prerequisites:
- Supported Phone: Galaxy S21 FE 5G SM-G990E U3
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S21 FE 5G SM-G990E U3 Stock ROM Details:
SM-G990E U3 Panama TPA G990EXXU3DVK4:
Model | SM-G990E Binary 3 U3, S3, Bit 3 |
Region / Country | Panama |
Language | Multi-Language |
Android version | Android 13 T |
Operator/ Carrier | Clear TPA (no logo, carrier apps) |
AP / PDA | G990EXXU3DVK4 |
CSC | G990EOWO3DVK4 |
Modem CP Version / Baseband | G990EXXU3DVJ4 |
product code | TPA |
Build Date | 2022-11-08 |
Security Patch Level | 2022-11-01 (November 1, 2022) |
Size | 6.3 GB |
Download | Google Drive |
Other Firmware For SM-G990E:
How To Install Galaxy S21 FE 5G SM-G990E U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy S21 FE 5G SM-G990E U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message on the lower-left panel.
8: Once Odin detects your Device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the "Pass" message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your Device may take some time to reboot but don't be alarmed.
When your Galaxy S21 FE 5G SM-G990E U3 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing."Galaxy S21 FE 5G SM-G990E U3 Firmware".
- Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.
- Phone must have a 70–80% charge.