Home Stock Firmware Galaxy S21 FE 5G SM-G990E U3 Firmware – Android 12 S

Galaxy S21 FE 5G SM-G990E U3 Firmware – Android 12 S

SM-G990E Binary 3 Firmware - Android 12 S

The specific Galaxy S21 FE 5G SM-G990E U3 Firmware Download Package comes with a Stock ROM of Galaxy S21 FE 5G SM-G990E U3 Security Patch Level 2022-11-01 (November 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S21 FE 5G SM-G990E Binary 3 Android 13 T Panama TPA G990EXXU3DVK4

There are various reasons to flash “Stock Firmware on Galaxy S21 FE 5G SM-G990E U3“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade the rest of FRP
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-prerequisites:

Galaxy S21 FE 5G SM-G990E U3 Stock ROM Details:

SM-G990E U3 Panama TPA G990EXXU3DVK4:

Model SM-G990E Binary 3 U3, S3, Bit 3
Region / Country Panama
Language Multi-Language
Android version Android 13 T
Operator/ Carrier Clear TPA (no logo, carrier apps)
AP / PDA G990EXXU3DVK4
CSC G990EOWO3DVK4
Modem CP Version / Baseband G990EXXU3DVJ4
product code TPA
Build Date 2022-11-08
Security Patch Level 2022-11-01 (November 1, 2022)
Size 6.3 GB
Advertisements
Download Google Drive
SM-G990E U3 Brazil ZTO G990EXXS3CVH3:
Model SM-G990E Binary 3 U3, S3, Bit 3
Region / Country Brazil
Language Multi-Language
Android version Android 12 s
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA G990EXXS3CVH3
CSC G990EOWO3CVG4
CP Version / Baseband Modem G990EXXU3CVG4
product code ZTO
Build Date 2022-08-05
Security Patch Level 2022-08-01 (August 1, 2022)
Size 6.4 GB
Download Google Drive
SM-G990E U3 Brazil ZTO G990EXXU3CVG4:
Model SM-G990E Binary 3 U3, S3, Bit 3
Region / Country Brazil
Language Multi-Language
Android version Android 12 s
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA G990EXXU3CVG4
CSC G990EOWO3CVG4
CP Version / Baseband Modem G990EXXU3CVG4
product code ZTO
Build Date 2022-07-06
Security Patch Level 2022-07-01 (July 1, 2022)
Size 6.4 GB
Download Google Drive
SM-G990E Binary 3 Firmware - Android 12 S - G990EXXS3CVG3:
Model SM-G990E Binary 3 U3, S3, Bit 3
Region / Country Brazil
Language Multi-Language
Android version Android 12 s
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA G990EXXS3CVG3
CSC G990EOWO3CVG3
CP Version / Baseband Modem G990EXXS3CVG3
product code ZTO
Build Date 2022-07-05
Security Patch Level 2022-07-01 (July 1, 2022)
Size 6.4 GB
Download Google Drive Mega

Other Firmware For SM-G990E:

How To Install Galaxy S21 FE 5G SM-G990E U3 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

Advertisements

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy S21 FE 5G SM-G990E U3 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message on the lower-left panel.

Advertisements

8: Once Odin detects your Device, click on the PDA button and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your Device may take some time to reboot but don't be alarmed.

When your Galaxy S21 FE 5G SM-G990E U3 finally boots up, you should run your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the "Baseband version."

Advertisements

Disclaimer:

  • Please read and understand the Full Guide before flashing "Galaxy S21 FE 5G SM-G990E U3 Firmware".
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Previous articleGalaxy Note20 5G SM-N981B U4 Firmware – Android 12 S
Next articleGalaxy A02s SM-A025F U4 Firmware – Android 12 S
Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!

LEAVE A REPLY

Please enter your comment!
Please enter your name here