Galaxy S21 FE 5G SM-G990B U1 Firmware – Android 12 S

Galaxy S21 FE 5G SM-G990B Binary 1 Firmware

The specific Galaxy S21 FE 5G SM-G990B U1 Firmware Download Package comes with a Stock ROM of Galaxy S21 FE 5G SM-G990B U1. This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S21 FE 5G SM-G990B Binary 1 Firmware – Android 12 S – 3IE – Ireland – G990BXXU1BUK5

There are various reasons to flash “Stock Firmware on Galaxy S21 FE 5G SM-G990B U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S21 FE 5G SM-G990B U1 Stock ROM Details:

Device Galaxy S21 FE 5G Model SM-G990B
Product SAMSUNG File Name Firmware
AP Version G990BXXU1BUK5 OS Android 12 S
CSC Version G990BOXM1BUK5 CSC 3IE
Binary (BIT/U) Binary 1 U1, S1, Bit 1 Upload Date 2022-01-03
[quads id=2]
Download Google Drive Mega

How To Install Galaxy S21 FE 5G SM-G990B U1 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the  Galaxy S21 FE 5G SM-G990B U1 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy S21 FE 5G SM-G990B U1 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S21 FE 5G SM-G990B U1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.

Leave a Reply

Your email address will not be published. Required fields are marked *