Home Stock Firmware Galaxy S20 Ultra SM-G988B U6 Firmware – G988BXXU6DUB5

Galaxy S20 Ultra SM-G988B U6 Firmware – G988BXXU6DUB5

Galaxy S20 Ultra SM-G988B Binary 6 Firmware

The specific Galaxy S20 Ultra SM-G988B U6 Firmware Download Package comes with a Stock ROM of Galaxy S20 Ultra SM-G988B U6 Security Patch Level 2021-02-01 (February 1, 2021). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S20 Ultra SM-G988B Binary 6 Android 11 R Brazil ZTO – G988BXXU6DUB5

There are various reasons to flash “Stock Firmware on Galaxy S20 Ultra SM-G988B U6“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Prerequisites:

Galaxy S20 Ultra SM-G988B U6 Stock ROM Details:

SM-G988B U6 Brazil ZTO – G988BXXU6DUB5:

Model SM-G988B Binary 6 U6, S6, Bit 6
Region / Country Brazil
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean ZTO (without logo, operator apps)
PDA G988BXXU6DUB5
CSC G988BOWO6DUB5
Product code ZTO
Build Date Fri, 05 Feb 2021
Security Patch Level 2021-02-01 (February 1, 2021)
Size 5.7 GB
Advertisements
Download Google Drive Android File Host

How To Install Galaxy S20 Ultra SM-G988B U6 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the [highlight color=”yellow”]Galaxy S20 Ultra SM-G988B U6 Firmware[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the smartphone to the computer, Odin will automatically recognize the device and show the “Added” message in the lower left panel.

8: Once Odin detects your device, click the PDA button and select the Firmware.tar file.

Advertisements

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed you can see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.

When your Galaxy S20 Ultra SM-G988B finally boots up, you should now run your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

Advertisements
  • Please read and understand the Full Guide before flashing “Galaxy S20 Ultra SM-G988B U6 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Previous articleGalaxy A02 SM-A022M U2 Firmware – A022MUBU2AUB4
Next articleGalaxy A72 SM-A725M U1 Firmware – A725MUBU1AUC4
Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!