Home Stock Firmware Galaxy S20 SM-G980F U7 Firmware – G980FXXS7DUD9

Galaxy S20 SM-G980F U7 Firmware – G980FXXS7DUD9

Galaxy S20 SM-G980F Binary 7 Firmware

Samsung SM-A515F U7 Firmware Started rolling the 2021-05-01 (May 1, 2021) new latest Android security patch with build number G980FXXS7DUD9. the updated Android 11 latest patch device best in Brazil. If you haven’t received the recent update version on your Galaxy S20 smartphone, then you can go manually to check the software update setting.

Samsung Galaxy S20 SM-G980F U7 Firmware

There are various reasons to flash “Stock Firmware on Galaxy S20 SM-G980F U7. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-requirements:

Galaxy S20 SM-G980F U7 Stock ROM Details:

SM-G980F U7 Brazil ZTO – G980FXXS7DUD9

Model SM-G980F Binary 7 U7, S7, Bit 7
Region / Country Brazil
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean ZTO (without logo, operator apps)
PDA G980FXXS7DUD9
CSC G980FOWO7DUD2
MODEM CP Version G980FXXU7DUD1
Product code ZTO
Build Date 26 Apr 2021
Security Patch Level 2021-05-01 (May 1, 2021)
Size 5.6 GB
Advertisements
Download Google Drive Android File Host

How To Install Galaxy S20 SM-G980F U7 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the [highlight color=”yellow”]Galaxy S20 SM-G980F U7 Firmware[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

Advertisements

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed, you will see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy S20 SM-G980F finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

Advertisements
  • Please read and understand the Full Guide before flashing “Galaxy S20 SM-G980F U7 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.