The specific Galaxy S20 FE SM-G780G U1 Firmware Download Package comes with a Stock ROM of Galaxy S20 FE SM-G780G U1 Security Patch Level 2021-07-01 (July 1, 2021). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S20 FE SM-G780G Binary 1 Android 11 R Brazil ZTO – G780GXXU1AUD5
There are various reasons to flash “Stock Firmware on Galaxy S20 FE SM-G780G U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Requirements:
- Supported Phone: Galaxy S20 FE SM-G780G U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S20 FE SM-G780G U1 Stock ROM Details:
SM-G780G U1 Brazil ZTO – G780GXXU1AUD5:
| Model | SM-G780G Binary 1 U1, S1, Bit 1 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 11 R |
| Operator / Carrier | Clean ZTO (without logo, operator apps) |
| PDA | G780GXXU1AUD5 |
| CSC | G780GOWO1AUD5 |
| MODEM CP Version | G780GXXU1AUD4 |
| Product code | ZTO |
| Build Date | 2021-04-27 |
| Security Patch Level | 2021-04-01 (April 1, 2021) |
| Size | 5.9 GB |
| Download | Google Drive | Android File Host |
Galaxy S20 FE SM-G780G U1 Brazil ZTO – G780GXXU1AUE2
Galaxy S20 Snapdragon FE SM-G780G
| Model | SM-G780G Binary 1 U1, S1, Bit 1 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 11 R |
| Operator / Carrier | Clean ZTO (no logo, carrier apps) |
| PDA | G780GXXU1AUE2 |
| CSC | G780GOWO1AUF1 |
| product code | ZTO |
| Build Date | 31 May 2021 |
| Security Patch Level | 2021-06-01 (June 1, 2021) |
| Size | 5.9 GB |
| Download | Google Drive | Android File Host |
How To Install Galaxy S20 FE SM-G780G U1 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy S20 FE SM-G780G U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S20 FE SM-G780G finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S20 FE SM-G780G U1 Firmware“.
- Use these instructions at your own risk.
- Phone must have a 70–80% charge.
