An Galaxy S20 FE SM-G780G U1 Combination File is a test mode that does not have the effect of fixing the hardware, but only the test function of the operation or damage.
However, a Combination file can recover IMEI, Baseband, or some software errors but not all. By using a combination file, you will lose all features, including calls, play games, web history, pictures. Etc.
Samsung Galaxy S20 FE SM-G780G Binary 1 Combination File – G780GXXU1AUD4
Samsung combination firmware (Samsung factory binary) and Samsung official firmware both are being provided in similar file names with little difference. Samsung combination firmware is being provided for repair purposes at Samsung service and Samsung official firmware for normal usage for Smartphone users.
Combination File Details:
|Model Name:||SM-G780G U1, Binary 1, bit 1, S1|
|Device Full Name:||Samsung Galaxy S20 FE SM-G780G|
How To Install Galaxy S20 FE SM-G780G U1 Combination File:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the [highlight color=”yellow”]Galaxy S20 FE SM-G780G U1 Combination File[/highlight] files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.
Press and hold the Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.
8: Once Odin detects your device, click on the PDA button and select the Galaxy S20 FE SM-G780G U1 Combination File.tar file.
9: Now, click on the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
The once Combination File process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
- Once you see, the Pass message in Odin, you can disconnect your Device from the computer.