The specific Galaxy S20 5G SM-G981W U2 Firmware Download Package has a Stock ROM of Galaxy S20 5G SM-G981W U2 Security Patch Level 2022-06-01 (June 2022). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy S20 5G SM-G981W Binary 2 Firmware – Android 12 S – G981WVLU2FVF2
There are various reasons to flash “Stock Firmware on Galaxy S20 5G SM-G981W U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update Downgrade reset for lock
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-prerequisites:
- Supported Phone: Galaxy S20 5G SM-G981W U2
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S20 5G SM-G981W U2 Stock ROM Details:
Model | SM-G981W Binary 2 U2, S2, Bit 2 |
Region / Country | Canada |
Language | Multi-Language |
Android version | Android 12 s |
Operator / Carrier | Clean (no logo, carrier apps) |
AP / PDA | G981WVLU2FVF2 |
CSC | G981WOYV2FVF2 |
CP Version / Baseband Modem | – |
product code | BMC |
Build Date | 20220616122300 |
Security Patch Level | 2022-06-01 (June 2022) |
Size | 5.85 GB Full Files |
Download | Google Drive | Mega |
Other Firmware For Galaxy S20 5G:
How To Install Galaxy S20 5G SM-G981W U2 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.
2: Download and extract the Galaxy S20 5G SM-G981W U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S20 5G SM-G981W U2 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S20 5G SM-G981W U2 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
- Phone must have a 70–80% charge.