This specific Firmware Download Package For Galaxy S2 Plus GT-i9105P comes with a Stock ROM of Galaxy S2 Plus GT-i9105P. USB drivers, Flash tool for Installing the firmware, and a brief guide.
It also is known as Galaxy S2 Plus GT-i9105P Flash File and Galaxy S2 Plus GT-i9105P Stock ROM. That firmware update is only for Galaxy S2 Plus GT-i9105P. Don’t try to install that firmware on other models of Samsung Android devices that can destroy your phone.
How To Flash Samsung Galaxy S2 Plus GT-i9105P Stock ROM
There are various reasons to flash “Stock Firmware on Galaxy S2 Plus GT-i9105P. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements to Install Galaxy S2 Plus GT-i9105P Stock ROM
Most smartphones back up automatically in the background in case of incidents. To ensure a complete transition to your new device, a full backup is necessary.
How To Install Galaxy S2 Plus GT-i9105P Firmware Update
1: Download and Install Samsung USB Driver on your computer.
2: Download and extract the Galaxy S2 Plus GT-i9105P Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold the Volume Down, Home and Power buttons at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy S2 Plus GT-i9105P finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. The firmware number can be found under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S2 Plus GT-i9105P Firmware“.
- Use these instructions at your own risk.
- Phone must have a 70–80% charge.
Galaxy S2 Plus GT-i9105P Stock ROM Details:
| File Name: | I9105PXXUBOB2_I9105POXXBOC1_XEF.zip |
| Country: | France |
| File Size: | 979 MB |
| Android Version: | 4.2.2 |
| Get Link |