Galaxy S10e SM-G970U U7 Firmware – Android 12 S

SM-G970U Binary 7 Firmware - Android 12 S

The specific Galaxy S10e SM-G970U U7 Firmware Download Package comes with a Stock ROM of Galaxy S10e SM-G970U U7 Security Patch Level 2022-09-01  (September 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S10e SM-G970U Binary 7 Firmware – Android 12 S – USC – United States – G970USQU7IVH3

There are various reasons to flash “Stock Firmware on Galaxy S10e SM-G970U U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy S10e SM-G970U U7 Stock ROM Details:

SM-G970U U7 USC – United States – G970USQU7IVH:

Model SM-G970U Binary 7 U7, S7, Bit 7
Region / Country United States
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean (no logo or carrier apps)
AP / PDA G970USQU7IVH3
CSC G970UOYN7IVH3
CP Version / Base Band Modem
product code USC
Build Date 20220901195210
ADD DATE  2022-10-05 04:10:15
Size 5.79 GB Full Files
[quads id=2]
Download Google Drive Mega

How To Install Galaxy S10e SM-G970U U7 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy S10e SM-G970U U7 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy S10e SM-G970U U7 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S10e SM-G970U U7 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.