Galaxy S10e SM-G970F U7 Firmware – G970FXXS7CTG1

S10e SM-G970F Binary 7 ROMThe Galaxy S10e SM-G970F Binary 7 Firmware Download Package has a Stock ROM of Galaxy S10e SM-G970F U7 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass the FRP lock and revert from root and custom ROM.

Samsung Galaxy S10e SM-G970F U7 Android 10 Q – G970FXXS7CTG1

There are various reasons to flash “Stock Firmware on Galaxy S10e SM-G970F U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy S10e SM-G970F U7 Stock ROM Details:

SM-G970F U7 Android 10 Q – G970FXXS7CTG1:

Model SM-G970F Binary 7 U7, S7, Bit 7
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator Clean ZTO (without logo, operator apps)
PDA G970FXXS7CTG1
CSC G970FOWO7CTF1
Product code ZTO
Build Date 02 Jul 2020
Security Patch Level 2020-07-01 (1 July 2020)
Size 4.3 GB
[quads id=2]
Download 4File Google Drive Android File Host

How To Install Galaxy S10e SM-G970F U7 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy S10e SM-G970F U7 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy S10e SM-G970F finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S10e SM-G970F U7 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.