The specific Galaxy S10e SM-G9700 U8 Firmware Download Package comes with a Stock ROM of Galaxy S10e SM-G9700 U8 ADD DATE 2022-12-30. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S10e SM-G9700 Binary 8 Firmware – Android 12 S TGY – Hong Kong SAR -G9700ZHS8HVL2
There are various reasons to flash “Stock Firmware on Galaxy S10e SM-G9700 U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy S10e SM-G9700 U8
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy S10e SM-G9700 U8 Stock ROM Details:
SM-G9700 U8 TGY – Hong Kong SAR -G9700ZHS8HVL2:
Model | SM-G9700 Binary 8 U8, S8, Bit 8 |
Region / Country | Hong Kong SAR |
Language | Multi-Language |
Android version | Android 12 S |
Operator / Carrier | Clear TGY (no logo, carrier apps) |
AP / PDA | G9700ZHS8HVL2 |
CSC | G9700TGY8HVL2 |
Modem CP Version / Baseband | – |
product code | TGY |
Build Date | 20221220103310 |
ADD DATE | 2022-12-30 15:31:02 |
Size | 5.29 GB Full Files |
Download | Google Drive | Android File Host |
How To Install Galaxy S10e SM-G9700 U8 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy S10e SM-G9700 U8 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy S10e SM-G9700 U8 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S10e SM-G9700 U8 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.