Stock Firmware

Galaxy S10+ SM-G975F U10 Firmware – G975FXXUAFUE3

Galaxy S10+ SM-G975F Binary 10 Firmware

Galaxy S10+ SM-G975F starts receiving an update with One UI 3.1. Updates are arriving in several countries, the Galaxy S10+ SM-G975F U10 Firmware is receiving One UI 3.1, and it is news in many regions, including Brazil, a novelty that brings the security patch of 2021-05-01 (May 1, 2021).

Samsung Galaxy S10+ SM-G975F Binary 10 Android 11 R Brazil ZTO – G975FXXUAFUE3

There are various reasons to flash “Stock Firmware on Galaxy S10+ SM-G975F U10“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.


Galaxy S10+ SM-G975F U10 Stock ROM Details:

SM-G975F U10 Brazil ZTO – G975FXXUAFUE3:

Model SM-G975F Binary 10 U10, S10, Bit 10
Region / Country Brazil
Language / Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean ZTO (no logo, carrier apps)
product code ZTO
Build Date 07 May 2021
Security Patch Level 2021-05-01 (May 1, 2021)
Size 4.7 GB
Download Google Drive Android File Host

How To Install Galaxy S10+ SM-G975F U10 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the [highlight color=”yellow”]Galaxy S10+ SM-G975F U10 Firmware[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.

When your Galaxy S10+ SM-G975F finally boots up, you should run your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”


  • Please read and understand the Full Guide before flashing “Galaxy S10+ SM-G975F U10 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Related Articles

Back to top button