Galaxy S10 SM-G973U U6 Firmware – Android 12 S

SM-G973U Binary 6 Firmware

The specific Galaxy S10 SM-G973U U6 Firmware Download Package comes with a Stock ROM of Galaxy S10 SM-G973U U6 Security Patch Level 2022-01-01 (January 2022). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S10 SM-G973U Binary 6 Firmware – Android 12 S – SPR – United States – G973USQU6HULD

There are various reasons to flash “Stock Firmware on Galaxy S10 SM-G973U U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S10 SM-G973U U6 Stock ROM Details:

SM-G973U U6 – Android 12 S – SPR – United States – G973USQU6HULD:

Model SM-G973U Binary 6 U6, S6, Bit 6
Region / Country United States
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean (no logo, carrier apps)
AP / PDA G973USQU6HULD
CSC G973UOYN6HULD
CP Version / Baseband Modem
product cod SPR
Build Date 20220117232110
Security Patch Level 2022-01-01 (January 2022)
Size 5.86 GB Full Files
[quads id=2]
Download Google Drive Mega

How To Install Galaxy S10 SM-G973U U6 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the  Galaxy S10 SM-G973U U6 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy S10 SM-G973U U6 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S10 SM-G973U U6 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
  • Phone must have a 70–80% charge.

Leave a Reply

Your email address will not be published. Required fields are marked *