Galaxy S10 SM-G973F Binary 14 Firmware

The specific Galaxy S10 SM-G973F U14 Firmware Download Package comes with a Stock ROM of Galaxy S10 SM-G973F U14 Security Patch Level 2021-12-01 (December 1, 2021). This helps you to bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy S10 SM-G973F Binary 14 Android 11 R Brazil ZTO G973FXXSEFUJ2

There are various reasons to flash “Stock Firmware on Galaxy S10 SM-G973F U14“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Galaxy S10 SM-G973F U14 Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements:

Galaxy S10 SM-G973F U14 Stock ROM Details:

ModelSM-G973F Binary 14 U14, S14, Bit 14
Region / CountryBrazil
LanguageMulti-Language
Android versionAndroid 11 R
Operator / CarrierClean ZTO (no logo, carrier apps)
PDAG973FXXSEFUJ2
CSCG973FOWOEFUJ6
MODEM CP VersionG973FXXSEFUJ2
product codeZTO
Build Date20 Oct 2021
Security Patch Level2021-11-01 (November 1, 2021)
Size4.8 GB
Advertisment
DownloadGoogle DriveAndroid File Host

Galaxy S10 SM-G973F Binary 14 Android 11 R Brazil ZTO G973FXXSEFUL1

ModelSM-G973F Binary 14 U14, S14, Bit 14
Region / CountryBrazil
LanguageMulti-Language
Android versionAndroid 11 R
Operator / CarrierClean ZTO (no logo, carrier apps)
PDAG973FXXSEFUL1
CSCG973FOWOEFUJ6
MODEM CP VersionG973FXXSEFUJ2
product codeZTO
Build Date2021-12-01
Security Patch Level2021-12-01 (December 1, 2021)
Size4.8 GB
DownloadGoogle DriveAndroid File Host

Galaxy S10 SM-G973F Binary 14 Android 12 Panama TPA G973FXXUEGULB

ModelSM-G973F Binary 14, U14, S14, Bit 14
Region / CountryPanama
LanguageMulti-Language
Android versionAndroid 12 s
Operator / CarrierClear TPA (no logo, carrier apps)
PDAG973FXXUEGULB
CSCG973FOXMEGULB
MODEM CP VersionG973FXXUEGULB
product codeTPA
Build Date2021-12-18
Security Patch Level2021-12-01 (1 December 2021)
Size5.9 GB

How To Install Galaxy S10 SM-G973F U14 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy S10 SM-G973F U14 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy S10 SM-G973F U14 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy S10 SM-G973F U14 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.
Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like

Tab A SM-T580 Binary 5 Combination File – T580XXU5ATD1

An Galaxy Tab A SM-T580 U5 Combination File is a test mode…

Galaxy A01 SM-A015M Binary 2 Firmware – A015MUBS2ATE1

The specific Galaxy A01 SM-A015M Binary 2 Firmware Download Package comes with a…

Samsung Galaxy A5 2016 SM-A510M Binary 7 Firmware [Stock ROM]

The specific Galaxy A5 2016 SM-A510M U7 Firmware Download Package comes with a…

Galaxy Tab S7 FE SM-T733C Binary 1 Firmware [Full Repair]

The specific Galaxy Tab S7 FE SM-T733C U1 Firmware Download Package comes with…