Galaxy S10 SM-G973F Binary 11 Firmware

The specific Galaxy S10 SM-G973F U11 Firmware Download Package comes with a Stock ROM of Galaxy S10 SM-G973F U11 Security Patch Level 2021-07-01 (June 1, 2021). This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy S10 SM-G973F Binary 11 Android 11 R Brazil ZTO – G973FXXSBFUF3

There are various reasons to flash “Stock Firmware on Galaxy S10 SM-G973F U11“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S10 SM-G973F U11 Stock ROM Details:

SM-G973F U11 Brazil ZTO – G973FXXSBFUF3:

Model SM-G973F Binary 11 U11, S11, Bit 11
Region / Country Brazil
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean ZTO (no logo, carrier apps)
PDA G973FXXSBFUF3
CSC G973FOWOBFUE6
product code ZTO
Build Date Fri, June 18, 2021
Security Patch Level 2021-07-01 (June 1, 2021)
Size 4.7 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy S10 SM-G973F U11 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy S10 SM-G973F U11 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy S10 SM-G973F U11 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S10 SM-G973F U11 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.