The specific Galaxy S10 SM-G973F/DS U16 Firmware Download Package comes with a Stock ROM of Galaxy S10 SM-G973F/DS U16 Security Patch Level 2023-03-01 (March 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S10 SM-G973F/DS Binary 16 Android 12 Brazil Claro ZTA G973FXXUGHWC3
There are various reasons to flash “Stock Firmware on Galaxy S10 SM-G973F/DS U16“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S10 SM-G973F/DS U16
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy S10 SM-G973F/DS U16 Stock ROM Details:
SM-G973F/DS U16 Brazil Claro ZTA G973FXXUGHWC3:
Model | SM-G973F/DS Binary 16 U16, S16, Bit 16 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 12 S |
Operator / Carrier | clear ZTA |
AP / PDA | G973FXXUGHWC3 |
CSC | G973FOWAGHWC3 |
Modem CP Version / Baseband | G973FXXUGHWC2 |
product code | ZTA |
Build Date | 2023-03-13 |
Security Patch Level | 2023-03-01 (March 1, 2023) |
Size | 5.6 GB |
Download | Google Drive |
How To Install Galaxy S10 SM-G973F/DS U16 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy S10 SM-G973F/DS U16 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode a Warning Yellow Triangle Sign appeares . Press Volume Up to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy S10 SM-G973F/DS U16 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S10 SM-G973F/DS U16 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.