The specific Galaxy S10+ SM-G975U1 U7 Firmware Download Package comes with a Stock ROM of Galaxy S10+ SM-G975U1 U7 Security Patch Level 2022-10-01 (October 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S10+ SM-G975U1 Binary 7 Android 12 United States USA XAA G975U1UES7IVJ2
There are various reasons to flash “Stock Firmware on Galaxy S10+ SM-G975U1 U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy S10+ SM-G975U1 U7
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy S10+ SM-G975U1 U7 Stock ROM Details:
SM-G975U1 U7 United States USA XAA G975U1UES7IVJ2:
| Model | SM-G975U1 Binary 7 U7, S7, Bit 7 |
| Region / Country | United States |
| Language | Multi-Language |
| Android version | Android 12 s |
| Operator / Carrier | Clear XAA (no logo, carrier apps) |
| AP / PDA | G975U1UES7IVJ2 |
| CSC | G975U1OYM7IVJ2 |
| CP Version / Baseband Modem | G975U1UES7IVJ2 |
| product code | XAA |
| Build Date | 2022-10-17 |
| Security Patch Level | 2022-10-01 (October 1, 2022) |
| Size | 5.4 GB |
| Download | Google Drive | Mega |
Other firmware for SM-G975U1:
How To Install Galaxy S10+ SM-G975U1 U7 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy S10+ SM-G975U1 U7 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy S10+ SM-G975U1 U7 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S10+ SM-G975U1 U7 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
