Galaxy S10+ SM-G9750 U6 Firmware – Android 11 R

Galaxy S10+ SM-G9750 Binary 6 Firmware

The specific Galaxy S10+ SM-G9750 U6 Firmware Download Package comes with a Stock ROM of Galaxy S10+ SM-G9750 U6 SECURITY PATCH LEVEL 2021-12-01. This helps you to bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy S10+ SM-G9750 Binary 6 Firmware – G9750ZHS6FULZ – TGY – Android 11 R

There are various reasons to flash “Stock Firmware on Galaxy S10+ SM-G9750 U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy S10+ SM-G9750 U6 Stock ROM Details:

SM-G9750 U6 Firmware – G9750ZHS6FULZ – TGY:

Model SM-G9750 Binary 6, U6, S6, Bit 6
Region / Country Hong Kong
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean ZTO (no logo, carrier apps)
PDA G9750ZHS6FULZ
CSC G9750TGY6FULZ
MODEM CP Version
product code TGY
Build Date 20211213221930
Security Patch Level 2021-12-01
Size 4.9 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy S10+ SM-G9750 U6 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy S10+ SM-G9750 U6 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy S10+ SM-G9750 U6 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S10+ SM-G9750 U6 Firmware.
  • Use these instructions at your own risk.
  • Phone must have a 70–80% charge.

About mobile modder

Blogging is a great way to keep up with the general public while still providing insight and advice. Especially if someone thinks of you as an expert in your field, it can have serious benefits.