A Galaxy Note10+ 5G U2 Combination File is a test mode that does not have the effect of fixing the hardware, but only the test function of the operation or damage.
However, a Combination file can recover IMEI, Baseband, or some software errors but not all. By using a combination file, you will lose all features, including calls, play games, web history, pictures. Etc.
Samsung Galaxy Note 10 Plus 5G SM-N976U Binary 2 Combination File – N976USQU2ATE1
Samsung combination firmware (Samsung factory binary) and Samsung official firmware are both being provided in similar file names with little difference. Samsung combination firmware is being provided for repair purposes at Samsung service and Samsung official firmware for everyday usage for Smartphone users.
The Advantages Of Combination File:
- The technician or the developer can thoroughly read and test the equipment of the device, and is considered as the service menu.
- Downgrade Your device and install software system Android version older than the current version.
- Unlock the device protection with the Google Account Google FRP.
- Fix the Root device key-DRK problem.
- Fix the problems of stopping the Samsung device in the Recovery Mode.
- Fix the problems of stopping the Samsung devices in the Samsung logo.
- Fixed problems with the IMEI serial number.
Pre-requirements:
- Supported Phone: Galaxy Note10+ 5G U2
- Charge your mobile: You may charge no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Backup Android Phone
- Download
- Download and install the Samsung USB Driver
Galaxy Note10+ 5G U2 Combination File Details:
| Model Name: | SM-N976U Binary 2, U2, Bit 2, S2 |
| Device Full Name: | Samsung Galaxy Note 10 Plus 5G SM-N976U |
| File Name: | FAC_FAQ0_N976USQU2ATE1_FACFAC_CL18795651_QB31566197_REV00 |
| Android Version: | Android 10 Q |
| File Size: |
1.78 GB |
How To Install Galaxy Note10+ 5G U2 Combination File:
Download the Odin and Samsung USB Driver on your PC. Follow the below link to install the firmware using the Odin flash tool.
How To Flash Samsung Combination File
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the [highlight color=”yellow”]Galaxy Note10+ 5G U2 Combination File[/highlight] files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.
Press and hold the Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.
6: Now, Download and open Odin. Then, connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.
8: Once Odin detects your device, click on the PDA button and select the Galaxy Note10+ 5G U2 Combination File.tar file.
9: Now, click on the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
The once Combination File process is completed, you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your Device from the computer.
Disclaimer:
- Please read and understand the Full Guide before flashing the “Galaxy Note10+ 5G U2 Combination File“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of information in this guide.
- Before flashing, the Combination File on Galaxy Note10+ 5G U2 must have a 70–80% charge.
