The specific Galaxy Note 8 SM-N950F U12 Firmware Download Package comes with a Stock ROM of Galaxy Note 8 SM-N950F U12 Security Patch Level 2020-07-01 (1 June 2020). This helps bypass the FRP lock and revert from the root and custom ROM.
There are various reasons to flash “Stock Firmware on Galaxy Note 8 SM-N950F U12“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy Note 8 SM-N950F U12 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy Note 8 SM-N950F U12 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Note 8 SM-N950F finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy Note 8 SM-N950F U12 Firmware“.
Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.