N900TTMBFOL1 firmware update: this is for the SM-N900T model of the Samsung Galaxy Note 3, which can be found here. The United States is set as the Firmware Region, and TMB T-Mobile is the CSC code. Check to see that the Model Number listed on your device is accurate.
If the phone doesn’t turn on, you can find the Model Number by flipping the device over or looking among the items that were in the box. The Model Number can be found in the Settings menu under “About phone” (Model Number). This particular Firmware PDA is N900TUVUFOL1, and it runs on the Lollipop (Android 5.0) operating system. The Firmware was built on Tuesday, December 8, 2015, at 14:20:00 pm.
The specific Galaxy Note 3 SM-N900T N900TTMBFOL1 Firmware Download Package comes with a Stock ROM of Galaxy Note 3 SM-N900T. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy Note 3 SM-N900T Firmware – N900TTMBFOL1
There are various reasons to flash “Stock Firmware on Galaxy Note 3 SM-N900T. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy Note 3 SM-N900T
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Note 3 SM-N900T Stock ROM Details:
SM-N900T Firmware – N900TTMBFOL1
| PDA/AP Version | N900TUVUFOL1 |
| CSC Version | N900TTMBFOL1 |
| MODEM/CP Version | N900TUVUFOL1 |
| Region TMB | United States |
| Build Date | 2015-12-05 |
| Changelist | 6005498 |
| OS | Lollipop |
| Download | Google Drive | Get Link |
How To Install Galaxy Note 3 SM-N900T Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy Note 3 SM-N900T Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Note 3 SM-N900T finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Note 3 SM-N900T Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
