The specific Galaxy Note 20 5G SM-N9810 U3 Firmware Download Package comes with a Stock ROM of Galaxy Note 20 5G SM-N9810 U3 Build Date 2022-01-20. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy Note 20 5G SM-N9810 Binary 3 Firmware – CHC – N9810ZCU3EVA7 – Android 12
There are various reasons to flash “Stock Firmware on Galaxy Note 20 5G SM-N9810 U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy Note 20 5G SM-N9810 U3
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy Note 20 5G SM-N9810 U3 Stock ROM Details:
SM-N9810 U3 Firmware – CHC – N9810ZCU3EVA7:
| Model | SM-N9810 Binary 3 U3, S3, Bit 3 |
| Region / Country | China |
| Language | Multi-Language |
| Android version | Android 12 |
| Operator / Carrier | Clean (no logo, carrier apps) |
| PDA | N9810ZCU3EVA7 |
| CSC | N9810OZL3EVA7 |
| MODEM CP Version | N9810ZCU3EVA7 |
| product code | CHC |
| Build Date | 2022-01-20 |
| Security Patch Level | 2022-01-20 |
| Size | 2.7 GB |
| Download | Google Drive | Android File Host |
How To Install Galaxy Note 20 5G SM-N9810 U3 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy Note 20 5G SM-N9810 U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed, you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy Note 20 5G SM-N9810 U3 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Note 20 5G SM-N9810 U3 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
- Phone must have a 70–80% charge.