Home Stock Firmware Galaxy Note 10+ SM-N976B U7 Firmware – Android 11 R

Galaxy Note 10+ SM-N976B U7 Firmware – Android 11 R

SM-N976B Binary 7 Firmware

The specific Galaxy Note 10+ SM-N976B U7 Firmware Download Package has a Stock ROM of Galaxy Note 10+ SM-N976B U7 Security Patch Level 2022-01-01 (January 2022). This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy Note 10+ SM-N976B Binary 7 Android 11 R Spain ATL N976BXXS7FUL2

There are various reasons to flash “Stock Firmware on Galaxy Note 10+ SM-N976B U7“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-requirements:

Galaxy Note 10+ SM-N976B U7 Stock ROM Details:

SM-N976B U7 Spain ATL N976BXXS7FUL2:

Model SM-N976B Binary 7 U7, S7, Bit 7
Region / Country Spain
Language Multi-Language
Android version Android 11 R
Operator / Carrier Vodafone ATL
PDA N976BXXS7FUL2
CSC N976BOVF7FUH3
MODEM CP Version N976BXXS7FUI5
product code ATL
Build Date 2021-12-20
Security Patch Level 2021-12-01 (1 December 2021)
Size 5.1 GB
Advertisements
Download Google Drive Android File Host
SM-N976B U7 Spain ATL N976BXXS7FUL2:
Model SM-N976B Binary 7 U7, S7, Bit 7
Region / Country Spain
Language Multi-Language
Android version Android 11 R
Operator / Carrier Vodafone ATL
PDA N976BXXS7FUL2
CSC N976BOVF7FUH3
MODEM CP Version N976BXXS7FUI5
product code ATL
Build Date 2021-12-20
Security Patch Level 2021-12-01 (1 December 2021)
Size 5.1 GB
Download Google Drive Android File Host
SM-N976B U7 Germany DTM N976BXXU7GVA5:
Model SM-N976B Binary 7 U7, S7, Bit 7
Region / Country Germany
Language Multi-Language
Android version Android 12
Operator / Carrier Clean
PDA N976BXXU7GVA5
CSC N976BODX7GVA5
MODEM CP Version
product code DTM
Build Date 20220115131610
Security Patch Level 2022-01-01 (January 2022)
Size 5.92 GB Full Files
Download Google Drive Android File Host

How To Install Galaxy Note 10+ SM-N976B U7 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.

Advertisements

2: Download and extract the [highlight color=”yellow”]Galaxy Note 10+ SM-N976B U7 Firmware[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button and select the Firmware.tar file.

Advertisements

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.

When your Galaxy Note 10+ SM-N976B U7 finally boots up, you should run your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

Advertisements
  • Please read and understand the Full Guide before flashing “Galaxy Note 10+ SM-N976B U7 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Previous articleGalaxy A50 SM-A505FN U9 Firmware – Android 11 R
Next articleGalaxy A52 SM-A525F U4 Firmware – Android 12 S
Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!