The specific Galaxy Note 10+ 5G SM-N976Q U5 Firmware Download Package comes with a Stock ROM of Galaxy Note 10+ 5G SM-N976Q U5 SECURITY PATCH LEVEL February 2022. This helps bypass FRP lock and revert from the root and custom ROM.
There are various reasons to flash “Stock Firmware on Galaxy Note 10+ 5G SM-N976Q U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
Fix boot loop issue
Update and Downgrade
Unroot or Fix Bugs
To solve the lag or stutter
Fix software issues.
Revert back to stock to get your war.
Pre-requirements:
Supported Phone: Galaxy Note 10+ 5G SM-N976Q U5
Charge your mobile: You may no less than a half charge.
Lcharge aptop or PC: To execute this installation, you must use a PC or Laptop.
How To Install Galaxy Note 10+ 5G SM-N976Q U5 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer user. If a Samsung USB Driver is already installed on your computer, Skip this Step.
2: Downlnd extract the Galaxy Note 10+ 5G SM-N976Q U5 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: After switching off the phone, you need to boot into Download Modemustot into download mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will be able to see a Warning YcanSign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.
8: Once Odin detects your Device, click on the PDA button and select Firmware. Tarfile.
9: Now, click on the Start button in Odin to the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you can see a Gree,n Box with Pass written in the Ocans process; the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc. The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot
When your Galaxy Note 10+ 5G SM-N976Q U5 finally boots up, you should now be running your desired firmware.
If you want to check correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy Note 10+ 5G SM-N976Q U5 Firmware“.
Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.