The specific Galaxy M62 SM-M625F/DS U2 Firmware Download Package comes with a Stock ROM of Galaxy M62 SM-M625F/DS U2 Security Patch Level 2022-11-01 (November 1, 2022). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy M62 SM-M625F/DS Binary 2 Android 13 T Brazil ZTO M625FXXU2CVK2
There are various reasons to flash “Stock Firmware on Galaxy M62 SM-M625F/DS U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy M62 SM-M625F/DS U2
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy M62 SM-M625F/DS U2 Stock ROM Details:
SM-M625F/DS U2 Brazil ZTO M625FXXU2CVK2:
| Model | SM-M625F/DS Binary 2 U2, S2, Bit 2 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 13 T |
| Operator / Carrier | Clean ZTO (no logo, carrier apps) |
| AP / PDA | M625FXXU2CVK2 |
| CSC | M625FOWO2CVK2 |
| Modem CP Version / Baseband | M625FXXU2CVK2 |
| product code | ZTO |
| Build Date | 2022-11-09 |
| Security Patch Level | 2022-11-01 (November 1, 2022) |
| Size | 5.4 GB |
| Download | Google Drive |
How To Install Galaxy M62 SM-M625F/DS U2 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If the Samsung USB Driver is already installed on your computer, Skip this Step.
2: Download and extract the Galaxy M62 SM-M625F/DS U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy M62 SM-M625F/DS U2 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy M62 SM-M625F/DS U2 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
