Galaxy M33 5G SM-M336B U1 Firmware – Android 12 S
The specific Galaxy M33 5G SM-M336B U1 Firmware Download Package comes with a Stock ROM of Galaxy M33 5G SM-M336B U1 Security Patch Level 2022-02-01 (February 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy M33 5G SM-M336B Binary 1 Android 12 Chile CHO M336BXXU1AVB7
There are various reasons to flash “Stock Firmware on Galaxy M33 5G SM-M336B U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
Suppose you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy M33 5G SM-M336B U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy M33 5G SM-M336B U1 Stock ROM Details:
SM-M336B U1 Chile CHO M336BXXU1AVB7:
Model | SM-M336B Binary 1 U1, S1, Bit 1 |
Region / Country | Chile |
Language | Multi-Language |
Android version | Android 12 s |
Operator / Carrier | Clean CHO (no logo, carrier apps) |
PDA | M336BXXU1AVB7 |
CSC | M336BOWO1AVB7 |
MODEM CP Version | M336BXXU1AVB7 |
product code | CHO |
Build Date | 2022-02-16 |
Security Patch Level | 2022-02-01 (February 1, 2022) |
Size | 5.3 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy M33 5G SM-M336B U1 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy M33 5G SM-M336B U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy M33 5G SM-M336B U1 finally boots up, you should run your desired firmware.
If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy M33 5G SM-M336B U1 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.