|

Galaxy M32 SM-M325FV/DS U6 Firmware – Android 13 T

Galaxy M32 SM-M325FV/DS Binary 6 Firmware
If you own a Galaxy M32 SM-M325FV/DS U6 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy M32 SM-M325FV/DS U6 With 2023-04-01 (April 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy M32 SM-M325FV/DS Binary 6 Android 13 Brazil ZTO M325FVXXU6DWD2

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy M32 SM-M325FV/DS U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Preparation:

How To Install Galaxy M32 SM-M325FV/DS U6 Stock Firmware:

Download Galaxy M32 SM-M325FV/DS U6 Latest Firmware:

SM-M325FV/DS U6 Brazil ZTO M325FVXXU6DWD2:

Model SM-M325FV/DS Binary 6 U6, S6, Bit 6
Region / Country Brazil
Language Multi-Language
Android version Android 13 T – One UI 5.1
Operator / Carrier Clean ZTO (no logo, carrier apps)
AP / PDA M325FVXXU6DWD2
CSC M325FVOWO6DWD2
Modem CP Version / Baseband M325FVXXU6DWD1
product code ZTO
Model References SM-M325FLBJZTO, SM-M325FZKJZTO, SM-M325FZWJZTO
Build Date 2023-04-14
Security Patch Level 2023-04-01 (April 1, 2023)
Size 5 GB
[quads id=2]
Download Google Drive

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the  Galaxy M32 SM-M325FV/DS U6 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy M32 SM-M325FV/DS U6 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue to encounter problems, you may need to perform a factory reset on your device.

Conclusion

Installing the latest firmware on your Galaxy M32 SM-M325FV/DS U6 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.

Must Read:

Leave a Reply

Your email address will not be published. Required fields are marked *