The specific Galaxy M31 SM-M315F U2 Firmware Download Package comes with a Stock ROM of Galaxy M31 SM-M315F U2 Security Patch Level 2022-04-01 (April 1, 2022). This helps bypass FRP lock and revert from the root and custom ROM.
There are various reasons to flash “Stock Firmware on Galaxy M31 SM-M315F U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy M31 SM-M315F U2 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.
2: Download and extract the Galaxy M31 SM-M315F U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode a Warning Yellow Triangle Sign appeares . Press Volume Up to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy M31 SM-M315F finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy M31 SM-M315F U2 Firmware“.
Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.